Ihr Warenkorb
keine Produkte

Peavey SESSIONBASS 19" Rackteil

Art.Nr.:
Peavey SESSIONBASS 19" Rackteil
Lieferzeit:
ca. 1-2 Tage ca. 1-2 Tage (Ausland abweichend)
Peavey SESSIONBASS 19" Rackteil

NEU - Originalverpackung unbenutzt nur zum Fotografieren ausgepackt

Features:

  • 2-Rack  space  chassis design
  • 130 Wattsinto 8 Q, and 200 Wattsinto 4 Q
  • 3-Band  active EQ with shiftable, mid-range control
  • Contour control
  • -10 dB Pad switch
  • Bufferedtuner send jack
  • Post EQ effects loop
  • Transformer-balanced XLR jack
  • Pre/Post EQ send switch for XLR jack
  • Ground Iift switch for XLR jack
  • Patented DDTTM power amp compression with defeat switch and LED indicator

FRONT PANEL FEATURES

INPUT JACK (1)

This inputwill accept signals from all types of bass pickups.

INPUT PAD SWITCH (2)

Provided for instruments that have extremely high output, which can result in overdriving (distorting)  the input stage. Depressing  the switch to its "in" position reduces the Ievei of the input signal by 10 dB.

TUNER SEND JACK (3)

A 1/4" jack is provided for connecting an instrumenttuner. This jack is buffered off the input jack so it is just like plugging in directly into the tuner.

BRIGHT SWITCH (4)

Provides a preset boost totreble frequencies. To activate, depress the switch to its "in" position.

PRE GAIN CONTROL (5)

Controls the input gain of the preamplifier.

CONTOUR  CONTROL (6)

Provides a specially voiced EQ as the knob is rotated clockwise. When the knob is fully counterclockwise

(set to 0) there is no voicing added.

LOW CONTROL (7)

An active tone control (shelving type, ±15 dß) that varies the low frequency boost or cut.

MID CONTROL (8)

An active tone control (peak/notch, ±15 dß) that adjusts the mid frequency range.

MID SHIFT CONTROL (9)

Selects the frequency band that the mid control cuts or boosts.

HIGH CONTROL (10)

An active tone control (shelving type, ±15 dß) that varies the high frequency boost or cut.

VOLUME CONTROL (11)

Controls the overall volume Ievei of the amplifier. The final Ievei adjustment should be made after the de­

sired sound has been achieved.

LINE OUT-XLR JACK (12)

Provides 600 ohm, transformer balanced signal for patehing into a sound reinforcement or recording console.

PRE/POST EQ SELECT SWITCH (13)

Allows selection between a Pre EQ (switch set to the "out" position) or a Post EQ (switch set to the "in" position) send to the XLR line out jack.

GROUND LIFT SWITCH (14)

Provided to Iift the ground on the XLR jack when ground loops are encountered.

EFFECTS SEND JACK (15)

Output for supplying signals to external Iew-Ievei effects or signal processing  equipment.

EFFECTS RETURN JACK (16)

Input for returning signals from externallow-level effects or signal processing  equipment.

DDT'M COMPRESSION DEFEAT SWITCH (17)

DDT'M compression is defeated when the pushbutton is in the "in" position. DDT should be enabled at all times to protect the speakers.

STATUS/POWER LED (18)

The LED is green when the power switch is in the "an" position. During normal operation, the LED also acts as a DDT indicator. The LED illuminates red when DDT power amp compression  is taking place. When DDT is defeated, the LED will illuminate red when clipping occurs.

POWER SWITCH (19)

Used to turn AC mains power an or off.

 

 

Dieser Artikel wird als B-Ware verkauft, obwohl neu, funktionsfähig und unbenutzt (aus Geschäftsauflösung) !

Es gelten die gesetzlichen Gewährleistungsbestimmungen für B-Waren! ( 1 Jahr Gewährleistung )